stainless steel blades Teflon Mist Purifier with 50Hz ~ 60Hz frame
Mist Purifier Specifications:
1.1 mm thickness welded stainless steel sheet
High Bake Epoxy Powder
Horizontal. Right/Left or Left/Right
Free standing, wall or frame mounted
Direct to junction box on unit
Washable aluminium mesh
On/Off Switch with operating light
Spiked design; aluminium / stainless steel blades
Ionizer - 12 KV / Collector- 6 KV
Mist Purifier Description:
some model specification can be offered, according to your
requirement ,some datas can be different
During machining, mist is produced by the interaction of the fluid
with the moving parts. When liquid hits fast moving parts, it is
thrown back and dispersed as fine droplets. The generation of mists
are mainly depending on:
Higher speed of tool = higher generation of mist
The volume, rate and point of delivery of metal working fluid to
the cutting edge.
For processing CNC, CNC lathe, CNC milling machine, machining
center, (inside and outside) grinding machine, gear machining, EDM,
oil pressure machine, washing machine, etc..
- fastener production
Cold heading machine, red, etc.
- heat treatment
Tempering, annealing, blackening process etc.
- machining tool manufacturing
Drill, cutting tools, etc.
In the steel manufacturing industry
Mill, anti rust oil spray, cooling liquid spray, etc.
Die machining process, lens polishing, large bearing lubrication,
Three layers of filtering device :
1.The first level filter adopts gas and liquid sintering net PTFE
surface smooth, oil absorption is strong, can use repeatedly
2. Level 2 is special effect filter.
3.Level 3 is efficient activated carbon layer, eliminate peculiar
mist purifier can be used in cutting oil, diesel and synthetic
cooling liquid as coolant in the process of oil mist and water
mist.Return you a nature workshop~
If metalworking fluids become excessively hot they may start to
”burn” and degrade. During machining of metal parts reaching a high
temperature, such as grinding procedures, smoke may be visible.
The gaseous state of any liquid is formed as molecules leave
(evaporate from) the surface of the liquid. The evaporation
increases with low boiling point of the liquid and increased
temperature of the fluid. In water based emulsion the evaporation
will increase the humidity in the plant.
2. Convinient and advanced;